cph6003a no. a1078-1/7 features ? high gain (f t =7ghz typ) ? high current (i c =150ma) ? ultraminiature and thin 6pin package ? large collector disspation (800mw) speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to- base voltage v cbo 20 v collector-to-emitter voltage v ceo 12 v emitter-to-base voltage v ebo 2v collector current i c 150 ma collector dissipation p c when mounted on ceramic substrate (250mm 2 0.8mm) 800 mw junction temperature tj 150 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7018a-002 ordering number : ena1078a 62712 tkim/d2408abms im tc-00001809 sanyo semiconductors data sheet cph6003a npn epitaxial planar silicon transistor high-frequency medium-power ampli er applications http:// semicon.sanyo.com/en/network product & package information ? package : cph6 ? jeita, jedec : sc-74, sot-26, sot-457 ? minimum packing quantity : 3,000 pcs./reel packing type: tl marking electrical connection 3 4 1, 2, 5, 6 gc lot no. tl 1 : collector 2 : collector 3 : base 4 : emitter 5 : collector 6 : collector sanyo : cph6 3 2 1 64 5 2.9 0.05 0.4 2.8 1.6 0.2 0.6 0.6 0.9 0.2 0.15 0.95 CPH6003A-TL-E
cph6003a no. a1078-2/7 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb = 10v , i e =0a 1.0 a emitter cutoff current i ebo v eb = 1 v, i c =0a 10 a dc current gain h fe v ce =5v, i c =50ma 100 180 gain-bandwidth product f t 7 ghz output capacitance cob v cb =10v, f=1mhz 1.3 2.0 pf reverse transfer capacitance cre 0.9 pf forward transfer gain | s21e | 2 v ce =5v, i c =50ma, f=1ghz 9db noise figure nf v ce =5v, i c =50ma, f=1ghz 1.8 3.0 db marking : gc continued on next page ordering information device package shipping memo CPH6003A-TL-E cph6 3,000pcs./reel pb free
cph6003a no. a1078-3/7 h fe -- i c collector current, i c -- ma dc current gain, h fe f t -- i c collector current, i c -- ma gain-bandwidth product, f t -- ghz cob -- v cb collector-to-base voltage, v cb -- v output capacitance, cob -- pf 1.0 10 7 2 3 5 1.0 23 57 10 23 23 57 100 it10199 v ce =5v 5 7 5 7 2 3 1.0 1.0 0.1 23 57 23 57 23 5 57 10 it10200 f=1mhz collector-to-emitter voltage, v ce -- v i c -- v ce collector current, i c -- m a 5 5 7 100 2 3 1.0 23 57 23 57 2 3 10 100 it14231 v ce =5v 160 140 120 100 80 60 40 20 0 024 810 6 it14230 i b =0 a 100 a 200 a 300 a 400 a 500 a 600 a 700 a 800 a 900 a 1000 a collector dissipation, p c -- mw p c -- ta | s21e | 2 -- i c collector current, i c -- ma ambient temperature, ta -- c forward transfer gain, | s21e | 2 -- db collector current, i c -- ma noise figure, nf -- db nf -- i c 0 20 40 60 80 100 120 140 160 0 100 200 300 400 500 600 700 800 900 it10204 0 2 4 6 8 12 10 1.0 23 57 23 23 57 10 100 0 2 4 6 8 1.0 23 57 23 23 57 10 100 it10202 it10203 v ce =5v f=1ghz v ce =5v f=1ghz when mounted on ceramic substrate (250mm 2 ? 0.8mm) collector-to-base voltage, v cb -- v reverse transfer capacitance, cre -- pf cre -- v cb it10201 5 7 5 7 2 3 1.0 1.0 0.1 23 57 23 57 23 5 57 10 f=1mhz
cph6003a no. a1078-4/7 s parameters (common emitter) v ce =5v, i c =20ma, z o =50 1 freq(mhz) s 11 ? s 11 s 21 ? s 21 s 12 ? s 12 s 22 ? s 22 100 0.550 254.1 21.532 119.9 0.036 54.6 0.527 -62.8 200 0.492 218.1 12.273 103.0 0.050 56.5 0.332 -80.3 300 0.477 201.9 8.448 95.3 0.063 61.7 0.267 -88.3 400 0.470 192.4 6.427 90.4 0.078 65.3 0.242 268.1 500 0.518 181.0 5.015 86.8 0.089 68.2 0.217 245.3 600 0.513 175.8 4.221 83.9 0.104 70.2 0.216 245.8 700 0.510 171.5 3.658 81.3 0.120 71.7 0.214 247.2 800 0.508 167.6 3.234 78.9 0.135 72.7 0.220 249.3 900 0.503 163.7 2.900 76.7 0.150 73.2 0.225 251.3 1000 0.497 160.1 2.636 74.4 0.166 73.7 0.231 254.6 1100 0.493 156.8 2.419 72.5 0.181 73.9 0.239 256.3 1200 0.489 153.4 2.243 70.5 0.196 74.1 0.247 258.8 v ce =5v, i c =50ma, z o =50 1 freq(mhz) s 11 ? s 11 s 21 ? s 21 s 12 ? s 12 s 22 ? s 22 100 0.465 231.1 25.203 111.9 0.029 59.2 0.413 -79.9 200 0.449 203.4 13.519 98.7 0.045 65.7 0.269 259.6 300 0.445 191.6 9.177 92.7 0.061 70.4 0.230 250.7 400 0.443 184.2 6.947 88.8 0.078 72.8 0.218 247.3 500 0.502 175.0 5.407 86.1 0.092 74.7 0.231 224.3 600 0.497 170.3 4.550 83.7 0.110 75.6 0.229 225.5 700 0.494 166.4 3.944 81.5 0.127 76.2 0.225 227.1 800 0.490 162.8 3.483 79.4 0.144 76.4 0.228 229.9 900 0.485 159.1 3.127 77.4 0.161 76.2 0.230 232.4 1000 0.478 155.5 2.845 75.5 0.178 76.1 0.230 236.1 1100 0.473 152.3 2.608 73.6 0.195 75.9 0.236 238.6 1200 0.468 149.0 2.423 71.9 0.211 75.5 0.239 242.0 v ce =5v, i c =100ma, z o =50 1 freq(mhz) s 11 ? s 11 s 21 ? s 21 s 12 ? s 12 s 22 ? s 22 100 0.451 219.5 25.808 108.5 0.026 62.4 0.359 -86.7 200 0.448 196.7 13.593 96.8 0.043 69.8 0.240 253.1 300 0.448 187.0 9.193 91.4 0.060 73.8 0.212 244.9 400 0.446 180.7 6.953 87.8 0.078 75.5 0.205 242.3 500 0.508 172.6 5.408 85.5 0.093 76.9 0.228 219.9 600 0.503 168.3 4.550 83.1 0.110 77.5 0.226 221.5 700 0.500 164.6 3.944 81.0 0.128 77.8 0.223 223.4 800 0.497 161.2 3.480 79.0 0.145 77.8 0.226 226.5 900 0.490 157.6 3.132 77.0 0.163 77.4 0.228 229.1 1000 0.484 154.2 2.842 75.0 0.180 77.1 0.227 233.1 1100 0.479 151.0 2.614 73.3 0.197 76.7 0.232 235.8 1200 0.473 147.8 2.423 71.6 0.214 76.3 0.236 239.3
cph6003a no. a1078-5/7 embossed taping speci cation CPH6003A-TL-E
cph6003a no. a1078-6/7 outline drawing land pattern example CPH6003A-TL-E mass (g) unit 0.015 * for reference mm unit: mm 0.6 2.4 1.4 0.95 0.95
cph6003a ps no. a1078-7/7 this catalog provides information as of june, 2012. speci cations and information herein are subject to change without notice. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. regarding monolithic semiconductors, if you should intend to use this ic continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. please contact us for a confirmation. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above.
|
